Sunday, March 17, 2013


This tutorial was written by MagsTags on March 17, 2013. Resemblance to any other tutorial is totally coincidental. Please do not copy or claim as your own or paste this tutorial anywhere on the Internet without written permission. Anything you create from this tutorial should be for personal use only. No profit is to be made from your results. It is strictly forbidden to Script or Translate my tutorials.

Materials Needed
A tube of choice. I used the Beautiful artwork of
©Zebrush which can be purchased @ (PFD)
You will need a license to use this art.
I used the Beautiful PTU Scrap Kit
by Kizzedbykelz, "Dark Easter"
 you can purchase @ the following stores: 
(PFD), (SATC), (HBC), (DSD) & (DD)
Mask- I used by Insatiable Dreams
 can be found @ (ID)
Drop Shadow stays the same unless
otherwise indicated.
C/P = Copy/Paste
ANL= As New Layer
NRL= New Raster Layer
DS= Drop Shadow
NRL - New Raster Layer
R= Resize
LD= Layer Duplicate
Let's Begin!
Open Tube and Mask
Shift-D on both and close the originals
Image - New Transparent Image 700 x 700
Open FlowerFrame C/P ANL
Move Upward Left a Little
LD - Move Downward a Little
Layer - Arrange - Move Down
Eraser Tool - choose Square - Size 74
Hardness 100 - Step 25
And Remove the Frame that is inside.
Click Layer Raster 2
Open Paper9 Copy
Magic Wand - Click inside Frame
Selections - Modify - Expand by 3
Layer - New Raster Layer
Layer - Arrange - Move Down
Paste Into Selection
Click Copy of Raster 2
Open Paper4  - Layer - NRL
Clone Brush Tool
Read Carefully
Here you have both the Image and the 
paper open on your workspace.
Change the size to your Clone Brush to 125
Now our going to right click on your paper
and you should hear a sound, this indicates
that you just cloned this part of the paper.
Now go to your image, you should be on
Layer Raster 4, and fill by right clicking
all thru the frame. If you run out of cloneing 
to continue to fill, just go back to your paper and 
repeat the right click, listen to the sound and then
back at your image and finish filing the frame.
  Do this carefully so you won't go outside of the
frame, if you do, use your Eraser Tool make sure 
it is set to Square and clean where 
you went outside the frame.
Click Layer Raster 2
Open Bow C/P ANL R 40% Add DS
 Open Chick C/P ANL R 60% Add DS
Open Crows C/P ANL R 60% Add DS
Open HangingEgg C/P ANL R 40% Add DS
Click Layer Raster 2
Open HangingFlowers C/P ANL
Open JellyBeanFlower C/P ANL Add DS
 Click Layer Raster 3
Open Lace C/P ANL
Open Leaves C/P ANL R 40% Add DS
Move under Layer Raster 1
and position
LD - Image Flip - Image Mirror
Move down a bit so the Crows
are not covered
Click Layer Raster 8
Open Spring WA C/P ANL R 60% Add DS 
Open Swirl1 C/P ANL
Layer - Arrange - Move Down
Open GlowSparkle C/P ANL
LD - Image Flip - Image Miror
Open Butterfly2 C/P ANL R 30%
     Open Bunny C/P ANL R 40% Add DS
Image Resize to 85%
**All Layers Checked**
Add Tube of Choice 
Resize if necessary
Click Layer Raster 1
Open Paper7 Copy
Select All -Layer - New Mask Layer
From Image
Choose Mask 400Insatiable
Click Ok -Select None
Layer- Merge Group - LD
X out tube layer
Image Resize 95%
**All Layers Checked**
Undo X on Tube Layer
You can now apply to layers you think
need to look crispier
Adjust - Sharpness - Sharpen
Add ©Copyright Info and Name
Layers - Merge Visible
Save as PNG
Your Done!
I really do hope you enjoyed doing this 
tutorial as much as I enjoyed writing it.
Would love to see your creations.
Please just email me @ (MagsTags)
with "Spring"
on the subject line.
Hugs & Blessings

No comments:

Post a Comment